A:-intermodulation
B:-linear
C:-harmonic
D:-phase
B:-linear
C:-harmonic
D:-phase
Correct Answer:- Option-C
2:-During EAC measurement, ____________ is measured with the volume control at the full-on position.
A:-Frequency range
B:-Total Harmonic Distortion
C:-Reference Test Gain
D:-SSPL 90
B:-Total Harmonic Distortion
C:-Reference Test Gain
D:-SSPL 90
Correct Answer:- Option-D
3:-A coupler having a ____________ cc cavity is used during hearing aid analysis.
A:-1.2
B:-2.0
C:-2.2
D:-6.0
B:-2.0
C:-2.2
D:-6.0
Correct Answer:- Option-B
4:-The advantage most readily apparent with binaural hearing aids is ___________.
A:-vastly better mid-frequency hearing
B:-better cosmetic appeal
C:-better unaided thresholds
D:-improved localization
B:-better cosmetic appeal
C:-better unaided thresholds
D:-improved localization
Correct Answer:- Option-D
5:-A physical phenomenon which negatively affects the transmission of mid to high frequencies to the side of the far ear is ______________ effect.
A:-body baffle
B:-precedence
C:-transmission
D:-head shadow
B:-precedence
C:-transmission
D:-head shadow
Correct Answer:- Option-D
6:-An average adult REUR has a primary peak around __________ Hz of around _________ dB.
A:-1000, 4
B:-4200, 10
C:-2700, 17
D:-2900, 17
B:-4200, 10
C:-2700, 17
D:-2900, 17
Correct Answer:- Option-C
7:-Hearing aids in which both, the processing of the audio signals and the control for the processing is done by digital aids are ____________ aids.
A:-quasi-digital
B:-programmable
C:-all-digital
D:-semi-digital
B:-programmable
C:-all-digital
D:-semi-digital
Correct Answer:- Option-C
8:-BICROS is used in cases that have _____________.
A:-both ears unaidable
B:-one ear aidable and the other ear unaidable
C:-one ear normal and the other ear unaidable
D:-one ear aidable and the other ear with a high frequency loss
B:-one ear aidable and the other ear unaidable
C:-one ear normal and the other ear unaidable
D:-one ear aidable and the other ear with a high frequency loss
Correct Answer:- Option-B
9:-_____________ systems involve the transmission of radio frequency waves.
A:-Hardwire
B:-FM
C:-Loop induction
D:-Infra red
B:-FM
C:-Loop induction
D:-Infra red
Correct Answer:- Option-B
10:-The ratio of the change in input SPL to the change in output SPL at a specified input level in an AGC system is called as ____________.
A:-Compression ratio
B:-Slewing ratio
C:-AGC ratio
D:-Compression threshold
B:-Slewing ratio
C:-AGC ratio
D:-Compression threshold
Correct Answer:- Option-A
0 Comments
Post a Comment