(A) Type script typed with manual typewriters
(B) Inkjet printer printout
(C) Electronic typewriter
(D) Laser printer
Answer: (A)
2. Measurement of stride is used in
(A) Foot length
(B) Shoe length
(C) Gait pattern
(D) Foot width
Answer: (C)
3. The following chemical is used for hardening of plaster of Paris cast of tyre mark?
(A) Sodium sulphate
(B) Sodium chloride
(C) Sodium carbonate
(D) Aluminium sulphate
Answer: (C)
4. The approximate age of iron gallotannate ink on document can be determined with the help of
(A) TLC
(B) Colorimetric analysis of ink
(C) Chloride ion diffusion of ink
(D) Change in preservative
Answer: (C)
5. The following material is most suitable for toolmark casting
(A) Plasticine
(B) Sulphur
(C) Woods metal
(D) Wax
Answer: (C)
6. The angle of tool application should be fixed for making standard marks in
(A) Hammer
(B) Screwdriver
(C) Pliers
(D) Firing pin
Answer: (B)
7. Besides silica, the main constituents of dolomite soil is
(A) Aluminium oxide
(B) Ferrous oxide
(C) Calcium magnesium carbonate
(D) Calcium sulphate
Answer: (C)
8. Friction tool marks are prepared by
(a) Hammer
(b) Drill
(c) Saw
(d) Firing pin
Codes:
(A) (a) and (b) are correct
(B) (b) and (c) are correct
(C) (c) and (d) are correct
(D) (a) and (d) are correct
Answer: (B)
9. Assertion (A): A translucent design impressed into paper during manufacture is called as water mark.
Reason (R): They help in providing information about the origin of paper.
Codes:
(A) (A) is correct but (R) is incorrect.
(B) (A) is incorrect but (R) is correct.
(C) Both (A) and (R) are correct.
(D) Both (A) and (R) are incorrect.
Answer: (C)
(B) Inkjet printer printout
(C) Electronic typewriter
(D) Laser printer
Answer: (A)
2. Measurement of stride is used in
(A) Foot length
(B) Shoe length
(C) Gait pattern
(D) Foot width
Answer: (C)
3. The following chemical is used for hardening of plaster of Paris cast of tyre mark?
(A) Sodium sulphate
(B) Sodium chloride
(C) Sodium carbonate
(D) Aluminium sulphate
Answer: (C)
4. The approximate age of iron gallotannate ink on document can be determined with the help of
(A) TLC
(B) Colorimetric analysis of ink
(C) Chloride ion diffusion of ink
(D) Change in preservative
Answer: (C)
5. The following material is most suitable for toolmark casting
(A) Plasticine
(B) Sulphur
(C) Woods metal
(D) Wax
Answer: (C)
6. The angle of tool application should be fixed for making standard marks in
(A) Hammer
(B) Screwdriver
(C) Pliers
(D) Firing pin
Answer: (B)
7. Besides silica, the main constituents of dolomite soil is
(A) Aluminium oxide
(B) Ferrous oxide
(C) Calcium magnesium carbonate
(D) Calcium sulphate
Answer: (C)
8. Friction tool marks are prepared by
(a) Hammer
(b) Drill
(c) Saw
(d) Firing pin
Codes:
(A) (a) and (b) are correct
(B) (b) and (c) are correct
(C) (c) and (d) are correct
(D) (a) and (d) are correct
Answer: (B)
9. Assertion (A): A translucent design impressed into paper during manufacture is called as water mark.
Reason (R): They help in providing information about the origin of paper.
Codes:
(A) (A) is correct but (R) is incorrect.
(B) (A) is incorrect but (R) is correct.
(C) Both (A) and (R) are correct.
(D) Both (A) and (R) are incorrect.
Answer: (C)
10. Which of the following is not a psychiatric disorder?
(A) Delusion
(B) Dementia
(C) Diplopia
(D) Hallucination
Answer: (C)
(A) Delusion
(B) Dementia
(C) Diplopia
(D) Hallucination
Answer: (C)
0 Comments
Post a Comment