A:-Zero
B:-Positive
B:-Positive
C:-Negative
D:-None of these
Correct Answer:- Option-C
2:-Power factor of a R-L-C parallel circuit is
D:-None of these
Correct Answer:- Option-C
2:-Power factor of a R-L-C parallel circuit is
A:-zero
B:-0.8 lagging
B:-0.8 lagging
C:-0.8 leading
D:-Unity
Correct Answer:- Option-D
3:- damping method is common in moving coil instrument
Correct Answer:- Option-D
3:- damping method is common in moving coil instrument
A:-Eddy current
B:-Fluid
B:-Fluid
C:-Air
D:-Spring
Correct Answer:- Option-A
4:-An auto-transformer consists of 200 turns. Winding is connected to 200V AC supply main for getting 24V output. The winding should be tapped at turns number
A:-12
B:-24
C:-100
D:-72
Correct Answer:- Option-B
5:-a six pole induction motor is connected to 50 c/s supply. It is running at 970 rpm. Find the percentage of slip
D:-Spring
Correct Answer:- Option-A
4:-An auto-transformer consists of 200 turns. Winding is connected to 200V AC supply main for getting 24V output. The winding should be tapped at turns number
A:-12
B:-24
C:-100
D:-72
Correct Answer:- Option-B
5:-a six pole induction motor is connected to 50 c/s supply. It is running at 970 rpm. Find the percentage of slip
A:-30%
B:-0.3%
C:-0.03%
D:-3%
Correct Answer:- Option-D
6:-The material used for fuse must have
A:-Low melting point and high specific resistance
B:-0.3%
C:-0.03%
D:-3%
Correct Answer:- Option-D
6:-The material used for fuse must have
A:-Low melting point and high specific resistance
B:-Low melting point and any specific resistance
C:-Low melting point and low specific resistance
D:-High melting point and low specific resistance
Correct Answer:- Option-A
7:-In an inductive circuit, the inductance of 0.02 Henry is connected to 200 V, 50 c/s supply. Inductive reactance is
A:-628Ω
7:-In an inductive circuit, the inductance of 0.02 Henry is connected to 200 V, 50 c/s supply. Inductive reactance is
A:-628Ω
B:-62.8 Ω
C:-6.28 Ω
C:-6.28 Ω
D:-6280 Ω
Correct Answer:- Option-C
8:-Processing of data in computers is done under the control of sets of instructions, is termed as
Correct Answer:- Option-C
8:-Processing of data in computers is done under the control of sets of instructions, is termed as
A:-Data instruction
B:-Information
B:-Information
C:-Programs
D:-None of these
Correct Answer:- Option-C
9:-In Windows, Resetting of system date and time can be done using
D:-None of these
Correct Answer:- Option-C
9:-In Windows, Resetting of system date and time can be done using
A:-Control Panel
B:-Calendar
C:-Devices & Printers
B:-Calendar
C:-Devices & Printers
D:-Accessories
Correct Answer:- Option-A
10:-To install new font the sequence of command is
Correct Answer:- Option-A
10:-To install new font the sequence of command is
A:-Start -> setting -> control panel -> font
B:-Start -> setting -> control panel -> font -> install new font
B:-Start -> setting -> control panel -> font -> install new font
C:-Start -> control panel -> font -> install new font
D:-Start -> setting -> font
D:-Start -> setting -> font
Correct Answer:- Option-B
0 Comments
Post a Comment