A:-Dry saturated steam
B:-Dry steam
C:-Wet steam
D:-Super heated steam
C:-Wet steam
D:-Super heated steam
Correct Answer:- Option-C
2:-Which of the following is false with regard to a refrigerant
A:-Refrigerant should not decompose at any temperature normally encountered
B:-Refrigerant should posses high thermal conductivity
C:-The electrical resistance of a refrigerant is important
D:-Liquid and vapour refrigerant should have high viscosity
B:-Refrigerant should posses high thermal conductivity
C:-The electrical resistance of a refrigerant is important
D:-Liquid and vapour refrigerant should have high viscosity
Correct Answer:- Option-D
3:-A large increase in deposit formation during milk processing can be expected
A:-If preheating milk to temperatures between 65-90°C
B:-If building up a back pressure
C:-If β-lactoglobulin is added
D:-If pH value is lowered from 6.8 to 6.4
B:-If building up a back pressure
C:-If β-lactoglobulin is added
D:-If pH value is lowered from 6.8 to 6.4
Correct Answer:- Option-D
4:-The type of corrosion that occurs when two different metals are in contact in the presence of a conductive solution
A:-Pitting corrosion
B:-Inter-granular corrosion
C:-Galvanic corrosion
D:-Crevice corrosion
B:-Inter-granular corrosion
C:-Galvanic corrosion
D:-Crevice corrosion
Correct Answer:- Option-C
5:-Which of the following packaging material can be used in a wide temperature range of -50°C to +150°C and has impermeability to odours
A:-Polyester
B:-Polyamide
C:-Polythene
D:-Polycarbonate
B:-Polyamide
C:-Polythene
D:-Polycarbonate
Correct Answer:- Option-A
6:-The type of evaporation in which the process cost is reduced by reducing the steam consumption
A:-Multiple effect evaporator
B:-Plate evaporator
C:-Circulation evaporator
D:-Horizontal tube evaporator
B:-Plate evaporator
C:-Circulation evaporator
D:-Horizontal tube evaporator
Correct Answer:- Option-A
7:-Which of the following is not true in the case of drum drying
A:-Drum drying requires less space than spray drying
B:-The flavour of the product is not affected by drum drying
C:-Alloy steel and nickel plate steel can be used as a material of construction
D:-The solubility of the product is much lower in drum drying
B:-The flavour of the product is not affected by drum drying
C:-Alloy steel and nickel plate steel can be used as a material of construction
D:-The solubility of the product is much lower in drum drying
Correct Answer:- Option-B
8:-The storage temperature needed for Cheddar cheese is
A:- 1°C
B:- 4°C
C:- -20°C
D:- 12°C
B:- 4°C
C:- -20°C
D:- 12°C
Correct Answer:-Option-D
9:-The minimum level of illumination required in the laboratory of a dairy plant
A:-20 W/m²
B:-29 W/m²
C:-13 W/m²
D:-41 W/m²
B:-29 W/m²
C:-13 W/m²
D:-41 W/m²
Correct Answer:- Option-D
10:-The insulating material known as super insulation in air conditioning industry which can be used for a temperature range of -200°C to +120°C
A:-Fibre glass
B:-Foam glass
C:-Magnesia
D:-Urethane
B:-Foam glass
C:-Magnesia
D:-Urethane
Correct Answer:- Option-D
0 Comments
Post a Comment